【Abstract】：
use
The commissioning of the pump should meet the following requirements:
① The steering of the driving machine should be the same as that of the pump;
② Find out the direction of pipeline pump and coaxial pump;
③ There should be no looseness at each fixed connection part, and the specifications and quantity of lubricants added to each lubrication part should comply with the provisions of the technical documentation of the equipment;
use
The commissioning of the pump should meet the following requirements:
① The steering of the driving machine should be the same as that of the pump;
② Find out the direction of pipeline pump and coaxial pump;
③ There should be no looseness at each fixed connection part, and the specifications and quantity of lubricants added to each lubrication part should comply with the provisions of the technical documentation of the equipment;
④The parts with pre-lubrication requirements should be pre-lubricated according to regulations;
⑤All indicating instruments and safety protection devices should be sensitive, accurate and reliable;
⑥The turning car should be flexible and free of abnormal phenomena;
⑦The high temperature pump should be preheated before the trial operation, the temperature should rise evenly, and the temperature rise per hour should not be greater than 50 ℃; the temperature difference between the surface of the pump body and the process pipeline with the working medium inlet should not be greater than 40 ℃;
⑧ Set up the connection device to eliminate the influence of temperature rise, and set up the bypass connection device to provide the cooling water source.
